Recent content by carroll898

It is gravity, there is no priming thingy thanks :?

one of the screws has a small spring behind it and the other is black (plastic) looking and this presses against a piece of metal from one of the cables (throttle??) :?

It is a challenge xtreme slm40c2 came from argos i think, don't really know what carb it is???

I couldn't get my petrol lawnmower to start and have messed with the air and fuel intake screws!!!! Can anyone tell me how to get them back to normal as I have since been told that it probably wouldnt start as I still had the old petrol in it!!! :oops:

:( I know. But the original box cannot even be moved an inch and I need my new kitchen fitted, and I don't want to be crawling under the unit every time I get a problem. Is there any way of running a new master box from this box??? then

Hi I would like to move my master box. The cable comes from the pole to the front of my house and down the wall and then goes in the rendering above my porch and then out at the bottom of the wall in the kitchen. I would like to bring the cable in through/by my landing window and site my...

wow thats brilliant, my nightmare may be over thank you very very very much :D :D :D :D :D :D

yes a ZA6

It is a 2 port zone vale

Can you simply unclip a ZA6 and replace with a ZA5. Are they compatible?

Yes

Hi Valve was replaced with ZA5, which was told would fit ZA6 Colours on new one were Brown, Blue, Green/Yellow, Grey and Orange I wired them in old for new, so I dont know if they are right The old one had a white wire, but this was just in end of block with nothing else

Hi can anyone help me? Just replaced zone valve, but wires are different, can anyone tell me in idiot terms, cos its for me, what colour the wires on the old zone valve will be on the new valve. ie. if brown on old is orange on new Or, indeed, if this is the fault, cos as when you put...