Hi guys, I need some help.
I moved house a couple of years ago and took down my alarm to take with me, I did take a note of the wiring connections but during the move I have lost them.
the system is an optima compact, the bell box has no obvious makers name neither do the pir's, the connection markings on the bell box are, my thoughts in brackets.
1) return (to T)
2) stb- (to strobe)
3) tc- (to bell- or B)
4) hold- (to A)
5) hold+ (to D)
6) bat- (obvious battery as it's still connected)
7) bat+ (obvious battery as it's still connected)
8) btd (do not have a clue)
any help would be appreciated
the pir connections are as follows
1) tamp (to tamper circuit)
2) nc (to tamper circuit return)
3) +vin (+13v)
4) gnd (-13v)
5) rly (to zone circuit)
6) nc (to other side of zone circuit)
7) eolr (end of line resistor (not used))
8) d.l (do not have a clue)
hope you can understand, thanks in advance
wayne
I moved house a couple of years ago and took down my alarm to take with me, I did take a note of the wiring connections but during the move I have lost them.
the system is an optima compact, the bell box has no obvious makers name neither do the pir's, the connection markings on the bell box are, my thoughts in brackets.
1) return (to T)
2) stb- (to strobe)
3) tc- (to bell- or B)
4) hold- (to A)
5) hold+ (to D)
6) bat- (obvious battery as it's still connected)
7) bat+ (obvious battery as it's still connected)
8) btd (do not have a clue)
any help would be appreciated
the pir connections are as follows
1) tamp (to tamper circuit)
2) nc (to tamper circuit return)
3) +vin (+13v)
4) gnd (-13v)
5) rly (to zone circuit)
6) nc (to other side of zone circuit)
7) eolr (end of line resistor (not used))
8) d.l (do not have a clue)
hope you can understand, thanks in advance
wayne