Quicker drying gloss?

Joined
15 Aug 2005
Messages
1,629
Reaction score
6
Country
United Kingdom
Just carried out a load of decorating using Johnston's non-drip gloss. What a nightmare. Something like ten hours to become touch dry. In some places that have been done for over a week it still feels a bit sticky. Need to do bedrooms next and was just wondering if there was a faster drying gloss I could use or if I should be biting the bullet and going for the non-solvent stuff. TIA.
 
Sponsored Links
If the gloss was white it will discolour in no time. Water based is better, but difficult for newbies to apply.
 
You can always add a tea spoon of Terebine driers to the oil based gloss to speed the drying process up.
 
Hi joe-90. Yeah, I know it will yellow but the bulk of what I have done had previously been painted with solvent based gloss so I was looking for the quick option. Just ca't remember previous gloss paint taking so long to dry and cure. Been a PITA.

Robbie uk. Had never heard of Terebine. Found this on the net. " Terebene is a powerful drier, used as a substitute for patent driers, and mixed in the proportion of 1 ounce of terebene to 1 pound of paint, will dry in about half an hour."

Guess that means you have to work fast?
 
Sponsored Links
Have just spotted a post discussing 2010 compliant paints having a high VOC (?) content and therefore taking longer to dry and cure. That could be my problem. Last time I decorated I used paint that was probably pre-2010.
 
Solo, does it have to be gloss? I used the oil-based johnstons satin and it dried within normal times, and about a year on, it's still white.
 
Hi blightymam. Never even considered anything like that. Brought up in the emulsion walls and ceilings and gloss everything else era. Obviously paint products and finishes have moved on. Will definitely look into that. Thanks.
 
Cobalt driers were the best but you cant get that now. Terebine driers can still be bought from the Crown decorator center or a Dulux center. Don't need much in it. Handy at this time of year.
 
Go water based - Bedec paint and a purdy brush;)
 
Nige F..............Will check that Bedec paint out further.

oldschoolmechanic.............Paint was new. Never been stored in the cold, at least not by me.
 
I just done my mum's old, chipped, oil based glossed woodwork. Gave it a sanding, used Zinsser Bullseye 123 as a primer and then Bedec Multi Surface Paint in satin. I've previously had a nightmare with water based paints (tried loads, finish was cr@p) but the Bedec was actually nice to work with - maybe not as perfect finish as oil based, but it's a pretty good finish - and dried in an hour. It's worth considering.
 
Just carried out a load of decorating using Johnston's non-drip gloss. What a nightmare. Something like ten hours to become touch dry. In some places that have been done for over a week it still feels a bit sticky. Need to do bedrooms next and was just wondering if there was a faster drying gloss I could use or if I should be biting the bullet and going for the non-solvent stuff. TIA.
I use Dulux trade gloss a lot, and it's normally dry enough to flat off between coats after a day.

Cheers
Richard
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top