Search results

Hi No probs. I understand and appreciate your explanation. If we go any further, you’ll have me wanting to apologise. Many thanks

Thanks. I wondered how long it would take for the first sideswipe, lecture.

Hi It’s magnetic-for former fridge magnets. Thanks

Many thanks. Another brilliant idea.

Hi Thanks for this. V ingenious. However, would I need to apply the making tape equally to cover the bottom two screws? Also, how would you ensure level line when sticking tape to wall?

Hi Never put one of these up before. Positioning the board against the wall with a spirit level and marking corners is easy bit. However, you then have to ensure screw holes in right place and level. (Also taking slight drop in board when fitted to screw) How would you tackle the job? Thanks...

Thanks. No cleaner (I wish) and kids growing up predated the floor installation. There can only have been the odd slippage of liquid on that area (probably tea) but obviously enough.

I sincerely hope so. Didn’t QA the job to that extent.

Nah, nowt like that.

Thanks. Could be leaking radiator pipe. Not sure what you mean by “contains other water”? Will get someone to have a look.

Many thanks for helpful replies. No to wet mop within nanoseconds. It was done circa 2016, so not sure whether clip or glue prevailing method then.

Thanks. Not sure how water has got into that area. Also not expecting free fix. More about whether whole dining room/lounge area would need to be re-laid?

Hi All We had lounge/dining room fitted professionally with laminate about eight years ago. (Not wood) It’s been great, but now notice an area which is “spongy” when you step on it. Panels also not butting together properly. It’s just a small area but guess it will spread. Not sure we still...

Thanks. Appreciate it’s an “it depends” scenario. Using tiles, base/screen-probably length of bath?

Hi We have a shower over our bath. (Supply provided by combi boiler) We haven’t used bath for 20 years and our now in our 60s, so wish to convert to a discrete shower unit. Any ideas on cost? Thanks

Morning All Quick update. Have now established Iocking problem due to multi lock not door position. Ie it sticks whether door in closed or open position. I’ve added some photos to show the roller lock in the open and closed positions. You can see gap under roller where mechanism not fully...

Great. Thanks again

Cheers. I need to move the top half away from the side where the lock is.

Thanks. Don’t suppose you could indicate whether I trust clockwise or anti clockwise? Cheers

Hi again May I ask a follow up on this? My three hinges have Allen bolts at side and underneath each hinge. Am I right in thinking I need to adjust the side screw on each hinge to adjust laterally? (Clockwise or anti clockwise?) I’ve also attached an image of door showing clearly the lack of...