Search results

Hi guys The machine is not heating the water. The machine just runs and runs and runs..... The heater element checks out fine. Will this be a board fault or could it be the thermistor.

Could the heater box be at fault aswell?

Hi there Having trouble with this Hotpoint WDL520p washer dryer. When you select any programme the electronic door lock clicks 6 times. The door stays locked but the machine does nothing. The door lock light flashes yellow. Any help would be most welcome. Thank you.

The pump was blocked last week. Took the pump off and removed a hair clip. It had all been working fine, then today the machine will not go into a fast spin. When you put the machine on spin only, the pump runs, the machine emptys, then the pump stops and the drum just turns slowly. If you...

I recently went t a house where instead of having an integrated washer, they had a freestanding washer with the kitchen unit door in front. The door hinge was long and slim that just screwed into the side of the cabinet. Does anyone know what these hinges are called?

Bit of a wierd fault this. Nearly every other wash the machine goes through the cycle as normal but will not spin. If you then select spin it will happily do it. Anybody had similar problems on a Hoover washer? Brushes and pump both fine.

Hi there This is a really wierd fault my friend has. Whenever he's used the oven and turns it off all the electrics trip out apart from the oven? But if he lets the oven cool down before turning it off their fine. There are two seperate trip switch boxes and the ovens not on...

Which ever wash programme you select, after about 10 minutes the water drains and the dryer comes on - very bizzre!!! Anybody else heard of this happening before? Its a Candy machine with the good old howdens sticker on (':(')

When you select a programme the door locks but the door lock light doesn't come on. The machine then doesn't do anything no matter what programme you select. Any ideas ?

Hi there The 5 lights running along the control panel all start flashing after about 5 minutes of the dryer been on (super wash, extra rinse etc). The vertical lights dont flash. Will this be a case of replacing the C17 relay?

Hi there Ive got an Indesit washer dryer IWDE12 that isn't heating the water properly. The water is heating up but not getting hot enough. If I put it on a hot wash the water only gets luke warm before the rinses begin. Is it most likely to be a board fault or am I best changing the heat...

I've read through the error codes. I can't find any part of the motor triac missing. Is it a case of replacing the motor or the board?

Having more trouble with this dryer. Last time I Found the rubber impellor had come off the pump. It's been fine since then, but now it doesn't seem to be drying well. All the filters are clear, the condenser unit is clear and the pump is free of fluff. I'ts taking twice as long as...

Just wondering if this is actually an F1 error as there is a one second gap between each flash. Would the motor need replacing aswell as the pcb?

Indesit WD12 As soon as you turn on the machine and put it to the reset point, the dial starts to turn continuouslly after about 5 seconds. The light continually flashes (there are no pauses). If you quickly turn the dial to any programme the programme starts no problem, but the dial...

My friend wants a top loader. Which would you go for Whirlpool AWE6517 or Hotpoint WTL500P I'm thinking the Whirlpool would be more reliable. Any advice would be most welcome.

The model is a Siemens Extraklasse 610 - Tumble dryer WT6100VGB/11

Hi my sister has a Siemens tumble dryer that will only work if you keep your finger on the start button. As soon as you take it off it stops. I can't seem to find a relay on this machine. Will it be a Faulty start button. The machine is about 10 years old and thankfully there is no fancy...

Hi there I'm having some trouble with a tumble dryer and need some help please. My Hotpoint CTD00G tumble dryer is working fine but there is no heat. Simple i thought. I changed the thermostats, but still no heat??? The heater unit looks fine and i've also checked the front thermostat...

My sisters Smeg DI612C dishwasher is not behaving. It first started a few weeks ago when it would just stop around 30 minutes into the programme. There was no flashing lights, no error codes. Now whenever you select a programme The pump runs for a minute then it stops and beeps a couple of...