Search results

:oops: I feel a bit embarrassed now! BUT to excuse myself the model number on the front of my washing machine does say it is a WF540, the barcode on the rear says the machine is actually a WF541P! thats where the problem is the model numbers do not match! I asked the company for a PCB for...

Hi Rocks I have just made a small discovery! On the front of my machine the model number is WF540 (That is what I have been going by) on the back of my machine is a small barcode sticker with the model number WF541P could it be that this is where the problem with the Eprom programme error is...

Thanks Rocks!!! you are a STAR!!! I will be on the phone first thing in the morning.

Hi Rocks You surely know your stuff! If the red wires on the back of the motor / tacho are ok can the eprom be reset? because I have had the motor off I know you cant see inside the wire casing but they look ok, is there any way of testing the tacho / wiring? I have checked most of the wiring...

Well here I am again! with a pile of clothes ready for washing! I have received the PCB board back from the suppliers it was faulty BUT I have just refitted it the same thing happens as my original board the machine starts up fills with water the drum agitates violently and then it all stops...

Well here I am again! I thought I would try the washing machine out this morning before I went to work as I was feeling lucky AND IT WORKED! but only for five minutes and it turned itself completely off. I tried to start it up and surprise surprise communication error again, So tonight Rocks I...

just f12 when you press the on button

Hi Rocks Done what you said everything looks fine checked brushes, checked blue wiring, everything looks fine I turn on the machine and it does not want to know, could it be a dodgy board?

Well I have checked the motor brushes again, fired the old machine up and hey presto lights one and two are now flashing communication error! it wont be long before I have had all the error codes available why did I say to the missus dont worry I can fix it!

Thanks for your reply Rocks, I think I may have to check the motor brushes again why dont I just stick to fixing cars!!! I will try to have another look tonight but it is getting late and its time to read the bed time stories to my girls. If I dont get back to you I will post a reply tomorrow...

Hi Again! Well Rocks1 I hope you are watching this post maybe you can help me again? I thought I would check the bushes on the motor before I ordered a new board. Well I took them off and had a look everything looked fine so I put them back, but when I started the washing machine up to check it...

Thanks Rocks1 Sounds like you know your stuff!!! I will let you know how I get on

Its the fourth one down / mini load light

Hi Rocks1 Thanks for your reply, Sorry I am being a bit thick! how do I tell which light is which by your description?

Hi all I have a 2 year old Hotpoint WF540, everything was going fine then the flashing lights started.The machine goes through the wash phase and then when it gets to the rinse/spin cycle the machine will stop and the start & mini load lights will flash thats it will not go any further. This...