Search results

Thanks Tony, In the manual it shows what needs to be removed for service etc, seems like a big job compared to what I have seen some engineers do on my previous boiler.Basically looks like you are stripping the inside back out of the boiler.Any way Thanks for all your help I am away for the...

Cut the ignition live on the back of your ignition (blackbox) extend the cable and add your switch to where you want it.Just make sure that the cable and switch are rated to the same volts/amps as the ignition live.Your haynes manual should have a wiring guide for the ignition with colour...

Thanks for all the advice, Seems like it is the fan,as suggested took the front off and checked movement on the fan before lockout and there was nothing. Seems as though the fan has blown the fuse on the pcb when it stopped working.Could the smell be due to the pcb fuse being changed but the...

Thanks mate, To be honest the fan does not come on when it starts its initial start up sequence so could well be,its also mentioned on the diagnosis for the volatile lockout.But then there is still the faint electrical burning smell coming from the control board? Both cost roughly the same so...

Today my boiler has given up on me,it lost all power and after changing the fuse on the pcb is now flashing fast on the blue indicator light.There is a slight smell of electrical burning coming from the pcb so I have isolated both the mains supply and gas supply to the boiler.Am I right to think...