Search results

I agree but ideally I don’t want the membrane to be visible

Hi some advice please You will see from photos I need to allow the front gutter and side gutter to meet the down pipe. 1: The front gutter must be higher to avoid a big gap and the felt be visible 2: The gutter coming from the side can’t be any higher due to needing the fall 3: I don’t want to...

Great! Thanks for confirming my hopes.

Hopefully a simple question ….. Currently I have a fan with a timer that works off the light pull cord. I want a fan with a timer and humidistat where the fan goes on with the light and off with the timer (same as it does now) and also on and off driven by the humidistat. Can I simply swap the...

Thanks both. You don't need a true straight edge to see the fence is out. I assume there is no adjustment for this??? In the absence of any i will go down the plywood route. Just don't know how it coud have gone out of true.

Hi I noticed when cutting smaller pieces of wood that they weren’t cutting at 90 degrees. I didn’t notice this problem when I first bought the saw from new. Looking at the photos the back clearly isnt square! Any ideas how to correct?

Hi, there is no adjustmnent to the height on the model. Basically it works fine on carpet without the dust collector cylinder but the suction increase massively when the cylinder is attached. All troubleshooting I can find on the internet relates to lack of suction but I have too much!!

Hi, suction has been fine for a year or more on Goblin upright vacuum cleaner. However, now suction fine without the dust collection cylinder attached but too strong (almost impossible to push) when attached! Any ideas anyone?

Hi any idea what this part is and what it’s function is? It sits inside the lid of the dust collector. The vacuum works fine until I put the dust collector on which increases the suction making it almost impossible to push! All looks ok but thought the part in the photo may have something to do...

That’s clear. Thanks for that

Hi just to clarify are you contradicting what muffking said?

Hi thanks for the replies. It is a timer fan and I have just tried it and it went off after 25 mins. Based on this I can only assume that the sparky didn’t test the timer based on muffking’s reply. Does that make sense?

Hi I had a sparky wire an extractor in a new bathroom with an isolator switch outside on the landing. I couldn’t understand why sometimes it worked and sometimes it didn’t! I removed the fan returned it to Toolstation and fitted a replacement and still the same. I checked the wiring in the...

I have searched the existing posts but couldn't find one that solved my problem. My bathroom is being refurbished (including reskimming the ceiling). I have removed the current light fitting and have temporarily fitted a pendant fitting. (No baths or showers taking place until after the...

Hi Terryplumb, I would but I don't know where the cable is spurred from Riseard, not seen these before. Look like the solution in one unit Thanks both

Hi, could you please advise me? I am moving a partition wall and need to move a socket (that is a spur) to allow this. This involves extending the spur by means of a junction box under the floorboards which will be inaccessible once the wall is moved. I went my local electrical wholesaler who...

Hi thanks for the quick responses.The junction box is power not lighting. The earth pin is metal. From what you say my original plan would be ok then as I understand it. Would you agree?

Hi I am in the process in installing a warmer drawer. It comes with moulded plug. My plan was to wire a socket off a junction box That sits on top of the kitchen cupboard out of site. However the installation instructions say “the appliance must be connected to a earthing socket”. Does this mean...

Sorry, missed text off. Found these in garage. Was wondering if the have any resale value. Cheers