Search results

Fit an automatic air vent suitable for outside and you can take it as high or low as you like :twisted:

Dennis Law haha

I didn't bother in the end. 150 quid to get some jobsworth from building control to look at a register plate, see I have done a good job, and sign it off. What a tight basta*rd and despite saving heavily on carrying out the installation yourself you still wouldn't pay to have it signed off...

Open the other 'blank' so its open air then try again

3 bar prv on boiler plumbed into the return pipe. 22mm pipe teed off the return rising vertically until height of the flue then an external prv at 2.5 bar attached to this 22mm pipe then 15mm discharge ran off as normal. Baxi approved this solution and sold me the 2.5 bar prv. Check with your...

When I read the title I thought this boiler would have been a Biasi. In the Biasi there is a transformer which hums away and is perfectly normal. As for yours ... ?

There is no washer in this tap if Im not mistaken but a ceramic disc. Try for a replacement cartridge online. Identifying the thing may well be the biggest problem. You can always buy a replacement tap as a last resort.

If you are keeping the elec shower and go down the pump route make sure you read the manufacturers instructions for the shower regarding pressure. If its a Triton Cara I would try and take it back, they're disgraceful. Salamander make decent pumps

Why did you go for reconditioned equipment?

Hahaha thats inventive. Try closing down one of the valves on the bottom rad and you will balance them. A little tweeking and you should get them up to temperature simultaniously