Search results

  1. C

    Intergas system boiler w/ Mixergy Cylinder wired as PDHW (aka X-Plan)

    Contact Richard burrows at the intergas shop
  2. C

    Multiple Megaflows

    It would need looking at as it could be piped in various ways ,the cylinders notin use don’t want leaving with stagnant water in.
  3. C

    Low Hot Water Pressure

    Possibly had high pressure taps fitted to a low pressure system
  4. C

    PE-X Pipe in Central Heating system

    If you can get that in why can you get copper in ?
  5. C

    Filter cleaning?

    Only going of my experience having fitted a lot and cleaned them when servicing .
  6. C

    Filter cleaning?

    Quality filter you won’t have any trouble with the valve leaking. Remove cap ,it also fits the valve to turn on/ off.no need to drain anything the system pressure pushes any sediment out ,couple of seconds will do
  7. C

    Flux - Do you have to use same brand

    No any combination
  8. C

    Put in New CH pump but no heat coming through!

    Possible,is heating working ? , have you an air vent on hot water cylinder
  9. C

    screwfix tank connector leaking

    Designed for a tank 5 mm ish thick ,your tank is thinner ? So run out of thread,puta second washer on the outside.
  10. C

    Help Required ... 3 Way Valve not always switching to Hot Water

    It’s nearly 5 years old don’t think it’s under warranty,asCBW said probably synchron motor
  11. C

    Connecting underfloor heating to CH System.

    If you want to separate the underfloor and rads yo will need 2 zone valves so they can be used individually
  12. C

    Vaillant ecotec 438 overheating on HW

    Probably a secondary heat exchanger issue apologies though it was a combi ,ignore my comment
  13. C

    Water heating system for a flat without a flue

    Pumped electric shower ,
  14. C

    Reasonable?

    To many unknowns to give advice, is its replacement ?
  15. C

    Hot water cylinder losing heat

    Dripping hot tap can / leak ?
  16. C

    no hot water

    Your boiler is the fanned flue model,not a diy repair unfortunately
  17. C

    Ideal Logic Max Issue

    No as valve is closed nowhere for heat to go.
  18. C

    Ideal Logic Max Issue

    Possibly a end switch on a zone valve sticking
Back
Top