Search results

  1. T

    Vaillant ecomax pro 18e condensing boiler

    you need to take the front case off, on the flow from the heat exchanger is an overheat there is a little red button that you need to pop down,then you will be ok.
  2. T

    Who manufactures the best combi?

    i wouldnt fit vailant boilers full stop,the case seal (silicon)burns away and the boiler catches fire as a result,also heat exchangers play up
  3. T

    Are corgi diversifying too much

    corgi have made a major mistake by sending out tens of thousands of grey id cards to all their gas installers and on the card it is stating that they are not competant to carry out gas work. The cards were for other trades ie ventilation,electrical etc. This will cost the registered gas...
  4. T

    Vaillant 622 codensing boiler noise

    the problem you have is quite common, you need to change the burner.
  5. T

    HELP!!!... Vaillant Combi not working...

    get a new enviromentally friendly condensing boiler you cheap skate
  6. T

    part diy install

    anyway i carry out work for three major boiler manufacturers, approx 60 percent i see have not been fitted by a corgi reg installer, the other 40 percent have, most corgi installations i see are not right, ie they fill out the benchmark book recording burner pressure figures, when the boiler...
  7. T

    How do I pressurise a potterton puma boiler

    the best way to pressurise a potterton boiler is to tell it that if it doesnt start working you will replace it with a saunier duval it always works i find
  8. T

    BUILDING REGS fitting isolation valves to cold and hot taps

    sorry box basher i am correct in what im saying if you look at the latest british standards you will see im right how about mixer taps on basins then
  9. T

    Help need i think my Aunts been Ripped off!

    why has kev plumbs argument about gas rating a boiler been removed i informed him that you can gas rate a boiler locking the modulation on high because he seemed to think you can only do it on hot water
  10. T

    BUILDING REGS fitting isolation valves to cold and hot taps

    if you want to know, you are supposed to fit non return valves to the hot and cold pipes going to the bath,sink,shower,and a non return valve to the toilet,as if someone is having a shower and someone turns the cold tap on in the kitchen and wants a drink of water you can possibly syphon the hot...
  11. T

    citroen relay whining noise

    help i have a citroen relay van when i go over about twenty miles an hour it starts to make a whining noise from the drivers side wheel. The faster i go the worse the noise any ideas
  12. T

    Gas bill

    kev your still wrong plank the boiler in question that i rated you can fix the modulation electronically so it wont modulate you are way behind mate oh i forgot your a plumber !
  13. T

    Gas bill

    kev plumb you know nothing you can gas rate a boiler on heating so long as you have maximum gas rate doh
  14. T

    Help need i think my Aunts been Ripped off!

    you guys are simply way behind on the latest boilers the manufacturers told us this on a training course still up to you
  15. T

    Help need i think my Aunts been Ripped off!

    i cant say who the manufacturers are but what you need to look at is if there is a digital display on the boiler and there is a diagnosing facility, and the all the parts for say an 18kw boiler are identical to say a 30 kw boiler then u know you are on the right lines. So buy the cheaper boiler...
  16. T

    Gas bill

    i went to gas rate a condensing boiler and the meter was a metres cube type digital display the readings never moved in the twenty minutes i was on site and the heating was on full blast
  17. T

    Help need i think my Aunts been Ripped off!

    your about a year behind in your thinking oh well never mind
  18. T

    Help need i think my Aunts been Ripped off!

    also another great one is if you buy a certain boiler and say you want 28kw of power you can buy the same range boiler at say 14kw for example the boilers are exactly the same all you do is change the settings in the codes of the boiler so you could save yourself alot of money.although you...
  19. T

    Help need i think my Aunts been Ripped off!

    their is a user display interface pcb which stops the process i know you must feel angry about it but so did i at first thats why i am posting
Back
Top