Search results

Cheers again Terry, any links to show me exactly what I’m after?

Cheers Terry My intention was to get something along these lines : http://m.builderdepot.co.uk/28mm-x-15mm-compression-reducing-coupling.html But wanted some confirmation this would work?? Or a suggestion of what I might well need instead.

Pic

Sorry, I’ve got an extensionon already, the positioning is fine the pipe is leaning back a little in the pic. My issue is the current fitting on the pipe is too big for the extension/rad which is 15mm

Morning DIYers I’m struggling to figure out what part I need to finish off connecting a new rad installation. The pic shows the pipe with its current drainage valve, the size is approx 27mm (???) the rad has a normal 15mm entry. I bought a 22mm to 15mm coupler but it’s too small (I bought...

Forever humiliated!

Thanks to much for taking the time to reply. I'm blaming the missus, it was her fault....or something.

Is it possible to delete a Topic you've created?? Problem solved :oops: :oops: :oops: :oops: :oops: :oops:

Hello, Thanks for taking a look at this first of all, appreciated. I'm installing a 'HEKTAR lamp' from IKEA. I thought it would be a simple process, I've done a few light fittings in the past but I'm no expert at all. There was a basic white plastic pendant light fitting there...

Hello, Thanks for taking a look at this first of all, this has been a constant issue for some time now, but we've had trouble finding the cause. Hoping someone on here will be able to help in some way. Here's the damp, it's in the corner of the kitchen, left of the sink and behind the...

No, has a spin speed selection 400 to 1400 - I've ran it on every speed with same results.

Good - tried all variations with the same outcome. Slow spinning, now fills and empties perfectly well but spinning just isn't happening - slow spin repeating

Also, want to make sure I'm getting the wires the correct way round - I have a red wire with a connector and blue and white wires on a single connector - on my pump I have two tabs to where the wires connect, one marked L and one marked N - which goes to which??

Before, the washing machine wouldn't drain and would error before getting to a spin. Now it just spins without much effort - it's like theres just not enough power ??

OK I fitted the new pump, which I been assured is the correct pump (the exact one as above) and all fits well etc. I've tried out the spin cycle but it won't spin at top speed, simply displays 9mins on the display, ticks to 8mins and slowly spins for a min, the goes back to 9min and same...

I've just emailed the same guy on ebay to ask about that exact pump Thanks a lot Why does the water need flicking around?? Regent (obvisouly not a plumber or electrician)

ah yes - the impeller - yep, thats the thing, thanks! This is exactly what it looks like - https://spares.bigwarehouse.com.au/images/1541442.jpg Is this common at all? I've removed the impeller and ran the machine again, but still get the 5E error - would this be the case in general...

OK I've managed to get the machine to spin, by taking out the filter propeller - It's definitely coming loose when spin kicks in, you can here it clattering around trying to spin but bouncing all over the shop. Is this common - any reason for this, I can't see any real wear or tear on the...