Search results

  1. C

    Help connecting relay to panel and internal sounder

    You have digressed a little, i'm not a professional alarm fitter so trade prices are irrelevant. Oh i'm sorry, correct me if i'm wrong but isn't this a DIY forum where DIY'ers can ask for advice on the best way to approach a task. As I said above, i'm not a professional alarm fitter, just...
  2. C

    Help connecting relay to panel and internal sounder

    Hi Josh, Yes, the external sounder is an Odyssey 1E The sound bomb is a quad rated at 190mA The PSU for the INF-WSM is rated at 7.5VA (taken off the label from the PSU itself) The current consumption of the INF-WSM module is 25mA...
  3. C

    Help connecting relay to panel and internal sounder

    OK, I paid £406 for the following kit list and fitted it myself: Infinite prime panel Infinite GSM module Texecom Odyssey bellbox 3 x Infinite wireless PIR's 2 x Infinite wireless magnetic contacts 1 x Infinite keyfob 1 x Double pole relay 1 x Internal sound bomb 1 x PSU for sound...
  4. C

    Help connecting relay to panel and internal sounder

    The internal siren is rated at 105dB, that's hardly poxy? I guarantee if I locked you in the cupboard where the panel is installed the noise would not be bearable! It just so happens that the cupboard is well insulated and the internal siren output is somewhat reduced throughout the rest...
  5. C

    Help connecting relay to panel and internal sounder

    No, the tones are actually generated from the siren, I have enabled this setting on the panel, see below taken from the manual:
  6. C

    Help connecting relay to panel and internal sounder

    The panel has both a speaker and siren. The entry and exit tones are generated by the internal siren (this is a user configurable parameter). The tones are perfectly audible when entering/leaving the premesis. Although they are audible, the internal siren just isn't loud enough to scare an...
  7. C

    Help connecting relay to panel and internal sounder

    That's what the manual says, i have attached the image if that's any clearer?
  8. Untitled

    Untitled

  9. Misc

    Misc

  10. C

    Help connecting relay to panel and internal sounder

    Thank you. I also have a programmable relay output on the panel rated at 100ma if this makes it any simpler? I can set the polarity of this and program it to either close or open on a siren trigger event.
  11. C

    Help connecting relay to panel and internal sounder

    Hi guys, I have an Infinite Prime wireless alarm system which I have been more than happy with, however because the main panel is installed inside a cupboard upstairs, the internal sounder isn't very loud. The system is connected to a wireless sounder module (INF-WSM) and a Texecom Odyssey...
  12. C

    Subfloor flatness, would this need levelling? please help

    That's what I thought however i've also read the following: "Make sure your sub-floor is flat enough to receive your new flooring. A bumpy floor will still remain a bumpy floor, + or – 5mm over 2 metres is the accepted guide. To check this lay a 2M (6ft approx) straight edge on the floor in...
  13. C

    Subfloor flatness, would this need levelling? please help

    Hello guys, I've spent most of the day checking the flatness of my concrete subfloor today in preparation for fitting an engineered wood floor. To test for flatness i've been using a 6ft straight edge. Please excuse my poor description but my method for doing this is outlined below...
  14. C

    My layout for engineered wood floor, feedback appreciated

    And what about my starting board in front of the hearth and how the others are centred behind it, is that correct? Sorry for all the questions, I just want to make sure I get this right. Thanks again :D
  15. C

    Discovered bitumen layer under carpet, can I float a floor?

    The carpet has been stuck to the tiles with adhesive so when I pull up the carpet, it pulls the tiles up too! There really isn't anything holding them on because the adhesive is completely dry and has no tack. This is the underlay i'm looking to purchase, is it ok or can you suggest an...
  16. C

    My layout for engineered wood floor, feedback appreciated

    Thanks for the tip, you are very helpful 8) So, would you say i'm on the right lines now with the staggering?
  17. C

    Discovered bitumen layer under carpet, can I float a floor?

    Hello guys, Well, I was just about to place my order for 17m2 of engineered wood planks (click system installation) but decided to pull up some of the carpet tonight to discover old thin black tiles stuck to the concrete floor with a thin layer of what appears to be a black bitumen adhesive...
  18. C

    My layout for engineered wood floor, feedback appreciated

    Ok guys, i've been working on a revised layout, see below. Have I understood correctly when you suggested centering the first board around the fireplace? Feedback would be most welcome. Thank you.
  19. C

    My layout for engineered wood floor, feedback appreciated

    That's great, I will have another go this evening and post up the plan. Claire.
Back
Top