Search results

depends on the kind of level you are using, i am guessing your are going to use a rotating laser, and staff??? simply set the tripod up in-between your four corners (middle) attatch the laser, level it with the three turning screws using the spirit bubble that comes built into it, set your...

these days bricks are made up of all sorts inside and just faced nicely, there probably was a bit of slag or something in the brick, but the cheap and nasty drill bit defo wouldn't have helped :D

you can use tek screws suitable for going into hot rolled steel, (normal steel) or cold rolled steel if it is the likes of a catnic lintel, you will get these from most fixings suppliers, just make sure the size screw you buy the thread reaches the steel as these screws tend to have a 15 - 20 mm...

forget stanley and black and decker i use a dewalt dw087k, this bit of kit is the dogs danglies, cross line laser level, around £150 but more uses than you can shake a stick at and as accurate as your ever gonna need :wink:

you can buy an angle finder these days witha magnetic base ideal for disadeck systems etc or just plain old traditional roofing, they are around £5 protractor? pencil? paper? all well and good if your boss sends you out to measure a job on friday afternoon and you forget your kit but come on...

hi, i have removed many of said gutters along with many other thousands of square metres of asbestos sheeting, as long as you keep the dust to a minimum and wear suitable ppe, mask gloves etc, it is possible to cut as long as you use some kind of damping down on the cut, i get away with...