Search results

Accept my apologies.. :?

I have been quoted £2700... -To tile a double garage roof and replace some timbers (roof currently felted) -To repoint a large section of brickwork -To supply and fit rone-pipes and gutter -To dig out and put drainage in garden This is a quote from a local company, is it fair ? THANKS.

The problem you have is a simple one to cure. All you have to do is replace the expansion vessel in the combi boiler.I had the same problem with my worchester combi,the system would lose pressure every month, then every week, eventually every 3-4 hours.When I topped up the system to start it...

The expansion vessel was internal, about rugby ball size and was part of a Worcester Bosch 350 combi.

Thanks oilman, replaced expansion vessel 3 days ago and combi pressure now stable.Engineer charged £84.

I have looked again and it appears to be a large amount of water, so no other option but to replace my expansion vavle. What would I expect to pay for an engineer to supply and fit, or is this something I could to myself.

On the advice I received from this forum about my heating problems. The first step was to check the pressure in my expansion vessel,and increase by using a footpump if found to be low.On removing the plastic cap and depressing the valve when attaching the footpump to the expansion vessel...

The expansion vessel of my Worcester Bosch 350 combi may the problem I have with my heating. I do not have the manual and do not know how to re-pressurise it , could someone tell me how. Also if it needs replacing should I try it myself or contact a heating engineer? THANKS

My combi boiler pressure is dropping to below 0.5 bar every day causing the system to show the low pressure warning light, and the system will not fire up.When i increase the pressure to between 1-1.5 bar manually the boiler starts, increases to around 3.5 bar the system then dumps about 600ml...