Search results

Whats the rgi`s on this site`s opinion on the reliability of HE boilers.I have seen a number of boilers fitted roughly 6 years ago needing replaced due to corrosion.Mainly Worcster Greenstars.I know there used to be problems with the metal flue inner (now plastic) but i have seen a number of...

there is sufficient room for expansion,just dont turn off both vlaves to the rad :D

I take GREAT offence at this i am not fat :P :P

The trickling sound does sound like air.Bleed the pump and stick a screwdriver in to make sure it does not stuck CRUNCH CRUNCH

shut of the cold main to the boiler (cos it is passing) open the prv until the pressure is at 0 and no water is dripping outside.Remove the 2 clips and the fitting attached to the copper pipe.There will still be a bit of water so put a towel down/cover electrics.Re-asemble in reverse. Remove...

if you open and close the prv a few times the dirt can be flushed or the rubber can re-seat.for the loop turn of the cold mains a replace the part with the knob on.leave the hose part and the double check valve,unless thats passing back

if your hot is mains pressure (combi/multipoint) you could fit a mixer. save on leccy bills

personally i would have went with the excell,but its for a customer who wants the cheapest sollution.it is a modulating combi Worcester 30cdi which i fitted and thats why i need to change the shower

im swapping a mira 88 rigid valve for a thermostatic.Mira recomend the Silver or the Element.Just wondering if any1 had swapped them.Im looking for as little alterations/tile removal as possible. cheers