Search results

as i read it the 24k would only give 9.2l yet the 28k would give 11l (roughly from memory) I want the valiant pro though which is only a 24k or 31 k so i will have to have the bigger annoyingly to get the better quality boiler over the plus if you see what im thinking

thanks all, good to hear your thoughts. Never heard of Intergas so im not to sure about them or their history. As long as the hot water meets our need then we will be very happy. turning down the ch is always handy so hearing your view dan on the Vaillant is great. cheers Thanks for all...

Thank you gas, we have 10litres a min so will have to go for a 28 or 32. Cheers that's useful.

Thank you Dan, these were the boilers recommended to me but I will look into the smaller plus ecotec and also this intergas you mention. Thanks for responding Just want to make sure I get the right boiler for our needs. I'm always open to other suggestions

Hi there, I'm torn with what new boiler to have. Either a Baxi Platinum 33 or a Valliant EcoTec Plus 831 or Pro 28. I'm gonna have the system power flushed and a magnaclean installed to look after it and plan to be in the property for several years. Any help or advice you could give on...

this sounds similar to my issues, im also a Eurocombi owner unfortunatley, although before this mine had worked fine It could be a combination of the heating sensor and main flow switch malfunctioning maybe.

ok looks like it's time to call an expert in now then as i can't figure out what it is and it looks like no one else does either. damn it

boiler fires up and ticks over but does not heat water only in flue mode can you kick start it to really fire up and heat the water this happens quite often, but sometimes works fine

Hi all, i have an Ariston Eurocombi A23 I have taken apart all of the Diverter Valve and cleared it all out as a first step as advised. The microswitch is activated fine and it all looks good. The problem is When we ask for hw or ch the boiler fires up as it should do but then seems to...

I have removed the diverter valve and all the gubbings with it including microswitch and am about to give it a clean and check it out as recommended is there anything else i should look at while i have it open to see what is causing the boiler to not produce hot water all the time, and...

thanks for looking any help is appreciated, i own a Ariston Eurocombi A23 Upon asking for hot water it often does not get very hot and when i turn the taps off the boiler is still going. This is the same for the central heating, when i ask for heating it sometimes appears not to get very...

I was going to test it but didn't think it would work randomly like this thats all

also when the boiler is heated up and been used for a while it appears to work fine too any thoughts at all to my last post? Help is greatly appreciated

The pin is operating fine, upon radiator demand it does not operate the switch and it is fully retracted. upon hotwater request it operates the switch and fully retracts when it turns off. therefore it seems to be working fine Could this simply mean that the microswitch is not...

Cheers Tony I've got a nice long weekend to do this now then! Are there any tests i can do to conrim that it is indeed this and not the cheaper diagram option. Or is it something im gonna have to open up nd check out first to diagnose the real issue? Thanks

Hi everyone i have a ariston a/23 eurocombi which when you turn the hotwater on it doens't get very hot and it seems the radiators come on too and stay on. sometime the raditor comes on too and stays on unless you switch the power off to the boiler. This happens occasionally, so im...

Hi there I recently installed a new bath so had to drain the system down to enable me to work on the pipework. Since then I have been having issues with my system. Firstly the central heating worked fine and would act accordingly when asked to do so by the thermostat. However when you used...

my e-mail should now be there !

again thanks for the help, my house is 130k i work all the hours i can and all my spare money goes on supporting my family. so i hope you can understand that when i say i can't afford it, it 's not because im cheap. but because i can only just pay the bills let alone do anything else with...

yeah all these shortened names Terry is using is confusing, however I do not have the money to get an engineer in. I had a good look at it tonight and the microswitch is definately being operated so changing the diaphragm won;t make any difference. ( i didn't properly understand what it did...