Search results

Replace 1 x Battery, REPLACE ALL Otherwise you will ALWAYS have this sort of problem

Looking at them does not check them, as you found

Surely the system will show a tamper fault 24hrs on or off - others do

These Heavy Duty contacts are designed to be mounted on the floor and driven over by HGVs Have been around for years, no problems

Every Alarm system that I have ever come across connected to both Fire & Intruder systems (which they should not be) used a different sound for each. For example a continuous sound for the Intruder system and an intermittent sound for the Fire Alarm

THAT question has been asked SO MANY TIMESC WHY do we still answer it?

How about a curtain PiR? Just Google.

I've had Virgin for a number of years, underground, all on cable, never a problem :rolleyes:

"airing cupboard", you are joking aren't you? NEVER put a control panel OR an extra power supply in an airing cupboard, you will never stop replacing batteries the heat is too much for them. When the cupboard is over loaded and the 'boxes' are getting covered up problems with cooked batteries...

Why? The batts. are where they are supposed to be.

I think you would find that the delay is meant to be there, so there is no interference between the two actions. The sounders going off then has no chance of upsetting any signalling that may be connected and the PA. After all the PA is more important than the sounders, especially if it has...

Also, what about the area below and in front of the detector now blocked by the cupboard? Is it now possible to move left/right below and therefore bypassing the detector (hidden by the cupboard?)

If an alarm engineer is qualified and knows Optex or Takex beam systems, you will not have any problems. I'm not going to go through all the specification of the beams they are easily found on the web.

Sparky, I wonder what the most important reading of all is? Not been mentioned at any time, I wonder if it has ever been heard of by anyone here, I've a couple of meters here that have saved many a problem. But who cares, I don't, only time will tell who is right Europlex ps. I'd just love...

Coincidence? No such thing with alarm systems. The battery is the usual fault, cause and effect from one of these 'experts' of 35/40yrs experence Still if you don't want help? Just carry on in your own sweet way. You have been told what the problem is. Why visit a Forum to ask questions about...

Possibly? No, an absolute certainty. Alarm system control panels should have their control panel battery replaced EVERY 4 to 5yrs, more if a problem seems to arise sooner. Remember, every 4 to 5yrs or expect problems.

So you are saying that when the tamper goes off when I remove the face of the sensor, that "may not" indicate that the sensor is actually working correctly? NO >>> " it does not" only means that the tamper to that detector is working.

("DT F RHC") --- Try this, "DualTec front right hand corner" and similar for other areas Surprised your company or other engineers here didn't know that one, it's easy. Have fun.

Lasers, unless James Bond 007 is going to break in they will not be necessary. Oddjob with his hat would be great.

nouniquename, think of a battery as a petrol tank just because you can smell petrol, it doesen't mean there is any fuel in the tank. Europlex