Search results

Use TF1 all the time. No problems. Some remove the large section head and have problems re-sealing them. You have no reason to remove tis section ever. Annual cleaning of the filter is done using the bottom screw off section in the process clearly described in the instructions. Great bit of kit.

If your unsure if its the motor or the micro switches then I would say its better to drain and replace the complete valve. You know then its going to work and be good for years to come. Do it right, do it once :lol:

How long did you leave them soaking in water? Works every time for me. You need at least 24 hours left soaking !!!!

Work

Four bedrooms and one bathroom would be ok. Don't go for anything less than 30kw though. You didn't say if it was a mixer shower or electric but as there is only one you will be fine.

I use Main all the time. They are a Baxi with a Main badge on. Excellent mid price range boiler. 30 kw band A combi is around £660 to buy including flue, clock and vat. 15 months warranty or 2 years depending on your installer. I can't recommend them enough. Also while your at it have a...

It's a no brainier !!! Too close to corner and too close to openable window. Also causing a nuisance so totally not to regulations. Is this a recent thing ? Have they recently moved it there ? You need to report it before someone dies !!!!!!! In the meantime keep the window firmly closed.

Hi guys. Does anyone know how to adjust the clutch pedal biting point on on this van. It's a 2004 model. Having to push right down to floor these days. Is it an easy DIY job or is it into the garage ?

What's the hose and head like ? If the hose inner has partially collapsed this would cause hot and cold running as would the head if the jets are blocked. Basic stuff but worth a try.

No good if scratched. The water will get under the o ring. Bigger hole is the only answer. If its tight enough to scratch the pipe then tape won't do any good.

Are you on fully pumped or gravity water ? What valves do you have ? 3 ports, 2 ports ?

It's all to do with setting the boiler up correctly. Having the correct amount of litres per minute to a specific temperature. Just get it to what's comfortable and leave it unless you want to take on the job of setting it up correctly. Nice job !!!!

Is it a main/Baxi/Potterton ?

You Don't get an internal collar with that boiler, they only supply the external one. Cut backs !!!! Hehe

You can drain the system totaly if you like as it will only do it good. Or if you dont want to Isolate the boiler with the little levers underneath and drain the boiler only. Also isolate the cold incoming to the boiler and open a hot tap lower than the boiler. This should help. As your are...

Ouch !!!! It's hard to know when to stop and cut you losses.

Yes that would need to be checked also. I always start with the common problems first. It could be a hundred things on these horrible things.

Hey tony, I'm glad you said that. Some guys will say it can be done without removing the gas valve but I can't. You have to rag it out at a funny angle and to me you can't guarantee it's gone back in properly.