Search results

  1. T

    Renault Trafic Won't Start

    Hi, Have had a beat up W reg Movano 2800 td for a couple of years and have only had one key for it, one thst doesn't have any buttons on it. Any way a couple of days ago it refused to start on cranking it with twjh key and in fact the immob warning light becomes solid ie stops flashing. Am...
  2. T

    Ariston a1234 DEAD!!

    Had the repacement door interlock arrive and replaced. Still dead. Had a look around the wiring etc whilst the lid was off and noticed a cable had come loose from a connector, traced it and found it had come off from the door locked indication light. Pushed this back on and the indication light...
  3. T

    Ariston a1234 DEAD!!

    Thanks for those pointers, there's definitely mains voltage on the because I've had a tester on it and it read 240v I'm not sure how I could determine a faulty pcb or on/off switch. I think I may have to invest in a new door interlock as I can get one from Fleabay for a few quid as a start...
  4. T

    Ariston a1234 DEAD!!

    Problem with a friend's washing machine. any help appreciated. The machine is not showing any lights and does not lock the door etc when closed. Have only checked the fuse in the plug so far and that's okay. Any pointers beyond this welcomed.
  5. T

    Leaking Mixer Tap Neck

    Hi, kitchen sink mixer tap has developed a leak from where the spout goes into the body. Managed to remove the spout expecting to find a knackered o ring but the perisher is actually more a square or possibly D secton seal. Anyone know where I might get my mitts on one? Many thanks in advance.
  6. T

    Dishwasher door will not open!!

    New handle bought and fitted. All okay now. Thanks again Rocks1
  7. T

    Dishwasher door will not open!!

    Many thanks for that Rocks1, Have got the handle removed and I suppose I must begin the search for a new one. I haven't actually seen anything within it which I'd describe as being broken though? I can operate the lock to it's locked position and then use the handle to unlock it. Having said...
  8. T

    Dishwasher door will not open!!

    Okay, some progress to report. I've managed to wrench the door open and retrieved our dishes etc and am now in a position to lok at repairing the lock/mechnaism. i don't suppose anyone has ever had one of these apart and would care to share any info with me. Luckily my efforts don't seem to...
  9. T

    Dishwasher door will not open!!

    We have an Indesit DW 9 S and after finishing a wash cycle the door will not open and I'm desperate to know if anyone else has suffered such a fault and hopefully the remedy. Oh, and ofcourse it's got most of our dishes etc in it.
  10. T

    Narrow friction hinges

    Hi, I need to replace a friction hinge on a upvc window and have come to learn that the replacement I need is an old style narrow one. 15-16 mm wide. I've had a look on Ebay but no one seems to be offering this older style. 250mm long 15/16mm wide and with a 13mm stack height. Surely I can't be...
  11. T

    Rounded off screws in boiler won't budge!? - Help!

    Hi, I read you've tried drilling these screw out and expect it was a high speed steel it you were using. I believe you'll need to use a drill bit which is considerably harder, probably a soild carbide or tungsten one. I recall having to use some as an apprentice many years ago to open out the...
  12. T

    Biasi Prisma 28se

    Thank you Jamsco!!
  13. T

    Top bloke. Helpful and polite.

    Top bloke. Helpful and polite.
  14. T

    Biasi Prisma 28se

    Will go and run the ch to see if the fault still occurs, and no the burner modulates perfectly on dhw demand.
  15. T

    Biasi Prisma 28se

    Hi and thanks Jamsco, No blockage on cold water in, and the divert valve is working fine. I'm just trying to pin down this intermittent fault as best as possible before committing to a course of action.
  16. T

    Biasi Prisma 28se

    Hi Mick, Thanks for the superquick reply! As I recall it sometimes did this whilst the ch was on for a few minutes too. Would that suggest both h/e being blocked? I did put some Aqueous logic cleaner through the system last year and didn't really see much crud come out of the rads when I flushed...
  17. T

    Biasi Prisma 28se

    This boiler has an intermittent fault whereby hot water demand causes it to light and increase temperature as you'd expect. Then it will either modulate the flame down and keep the burner alight, or it will reach temperature and then the burner will go out with no modulation down and relight...
  18. T

    Biasi Prisma 24SE Boiler - Central heating always ON !!!!!

    Hi, I had a similar problem with a Biasi Prisma 28se and it turned out to to be due to moisture in the CH micro switch. I think I picked a suitable spare up from Maplin's for a couple of quid.
  19. T

    Ferroli Optima 701 problems

    Hi Tony, just to say our baltis are even better now and that if you're in this neck of the woods I'd be able to direct you to a fine establishment!
  20. T

    Problem with newly fitted diaphragm...

    Sounds more like circulation problem rather than diverter valve diaphragm. Pump may be slow, blocked etc.
Back
Top