Search results

I thought that it would be better to use something a bit more commercial/industrial?

Hi guys i'm in the process of converting my basement into a kitchen and need advice on the type of pump to use. It will drain the sink and the dishwasher. I would like to fit it in an island which complicates things slightly. So what type of pump do all these London basement conversion...

Right it seems that the pump live from the boiler goes into the external wiring centre then off to the Pump (see external wiring pic It's the Brown and black connected by the chock block). So it's wired incorrectly. Could this be a work around> i have noticed there is no CH out, DHW out...

I'll take a look tomorrow in the light. But something is wired into it. so from what you have said it is wired incorrectly. I'll get back, thanks

Thanks Picasso, there is an external wiring centre so either the pump live is wired into this or directly to the pump. Do you mean that the pump should get its power from the mains terminal through the external wiring centre. Sorry to be a pain in the neck.

Does this mean that there should be no wire whatsoever in the pump live teminal in the boiler?

Hi guys. My water pump is running constantly. I have a Potterton Kingfisher MF on gravity HW and pumped CH. No valves or tanks stat. I have noticed my pump is running constantly (it could well have been like this since i moved in to the property 1yr ago). The pump is controlled by the...

CPSGAS Is this meant for me?

The boiler is now firing up on it's own every now and then. Anyone?

Hi guys I need some more help please. I have investigated further checked connections etc and the problem seems to have righted itself. I now have HW on its own. However I have now noticed that the pump runs continuously. Did it do this before? I suspect it may have but I dont know. The boiler...

Thanks guys i'll take a look.

Do you mean the programmer? A loose connection within the boiler? thanks for the help

i dont/have never manually selected anything guys

thanks Terrydoh i should have noted though that it has only just stopped working after a year and a half of being at this property. So it is not working as it has. I know what you mean I had my last gravity fed system converted to fully pumped.

Hi I can currently only get hot water with the CH on. I have a Potterton Kingfisher on gravity fed hot water system so no motorised valves. When i put the programmer on HW only, the light on the programmer comes on but the boiler does not fire up. Everything is ok when the CH and HW is...

Spot on Andy, i thought they had been balanced but on inspection the valves were fully open. I suppose the flow was far too fast through them. Thanks for your help and all the best.

heres what i mean by branch and trunk this is off wikipedia. my set up is slightly different the last TWO rads are on 15mm : the whole system is fine apart from these the last two rads.