28i RSF and Wireless Towerstat RF ( Selectable Volt Free )

Discussion in 'Plumbing and Central Heating' started by lucky1313, 28 Feb 2011.

  1. lucky1313

    Joined:
    28 Feb 2011
    Messages:
    17
    Thanks Received:
    0
    Location:
    Blackpool
    Country:
    United Kingdom
    28i RSF and Wireless Towerstat RF ( Selectable Volt Free )

    Hi

    I am trying to fit a Towerstat RF wireless thermostat to my old age boiler a 28i RSF, this is the old grey one with only a mechanical timer unit rather then any thermostat.

    I have found a guide that mentions the CM907

    http://www.diynot.com/forums/viewtopic.php?p=823347#823347

    but i'm not sure what the equivelent AB connections are on the Towerstat

    Can any help ?
     
  2. lucky1313

    Joined:
    28 Feb 2011
    Messages:
    17
    Thanks Received:
    0
    Location:
    Blackpool
    Country:
    United Kingdom
  3. lucky1313

    Joined:
    28 Feb 2011
    Messages:
    17
    Thanks Received:
    0
    Location:
    Blackpool
    Country:
    United Kingdom
  4. mikely

    Joined:
    11 Feb 2005
    Messages:
    305
    Thanks Received:
    72
    Location:
    Lancashire
    Country:
    United Kingdom
    Connect the Towerstat as per the volt free switching diagram on page 10 of the Towerstat manual (link wire removed). Connect ‘Live from load’ to boiler RL (X2 terminal block), ‘Switched live output’ to boiler RI. Also connect live and neutral to the Towerstat from CL and CN terminals.
    See boiler installation manual Fig 12 and 13 here: http://www.worcester-bosch.co.uk/ca...instructions-for-28i--discontinued-nov-05.pdf
     
    • Thanks Thanks x 1
  5. lucky1313

    Joined:
    28 Feb 2011
    Messages:
    17
    Thanks Received:
    0
    Location:
    Blackpool
    Country:
    United Kingdom
    that's excellent thanks and all sorted now :D :)
     

Share This Page