- Joined
- 20 Apr 2014
- Messages
- 1
- Reaction score
- 0
- Country
hi guys. ..
ok a few years ago my puppy chewed through the 6 core cable from the panel going to the sensors..didn't bother me at the time as rarely used the alarm so just left bit be.
Other day I decided its time to fix it. couldnt remember code so did the clear nvm trick with power down and wire between certain terminals. after that I powered down again and did complete fix on then wire cutting out the chewed part...However on power up the controll panel is now completely unresponsive. .all the keys are illuminated and all the zones are lit.. tamper is unlit.
any ideas what to do next???
cheers
ok a few years ago my puppy chewed through the 6 core cable from the panel going to the sensors..didn't bother me at the time as rarely used the alarm so just left bit be.
Other day I decided its time to fix it. couldnt remember code so did the clear nvm trick with power down and wire between certain terminals. after that I powered down again and did complete fix on then wire cutting out the chewed part...However on power up the controll panel is now completely unresponsive. .all the keys are illuminated and all the zones are lit.. tamper is unlit.
any ideas what to do next???
cheers