BAXI 130HE problem...

Discussion in 'Plumbing and Central Heating' started by Royston Vasey, 29 Nov 2005.

  1. Royston Vasey

    Joined:
    29 Nov 2005
    Messages:
    8
    Thanks Received:
    0
    Location:
    Durham
    Country:
    United Kingdom
    It's only a year old and it's started playing up.

    When the central heating is on, if you switch a hot water tap on, it's failing to cut over to the hot water - it tries about 3 or 4 times then registers a fault "LO" which according to the manual is "ignition" After resetting the central heating eventually kicks back in but the hot water problem is still there.

    Any ideas - is this owt to do with the diverter?
     
  2. Royston Vasey

    Joined:
    29 Nov 2005
    Messages:
    8
    Thanks Received:
    0
    Location:
    Durham
    Country:
    United Kingdom
    I've had a plumber round this afternoon and of course it works perfectly for him and he can't find a fault .....10 mins after he left I'm hitting the reset button...........arrrrrggghhhhh!!!!!!!
     
  3. gazthepottertonengineer

    Joined:
    21 May 2005
    Messages:
    1,294
    Thanks Received:
    134
    Country:
    United Kingdom
    the sort of things i would be checking would be gas valve pressures and electrodes :confused:
     
  4. Royston Vasey

    Joined:
    29 Nov 2005
    Messages:
    8
    Thanks Received:
    0
    Location:
    Durham
    Country:
    United Kingdom
    Cheers for that - mate who's a plumber said the same.
     

Share This Page