Baxi Potterton boiler Suprima 40L: pilot light not igniting

Discussion in 'Plumbing and Central Heating' started by cotopaxi, 1 Nov 2010.

  1. cotopaxi

    Joined:
    22 Apr 2006
    Messages:
    37
    Thanks Received:
    0
    Location:
    Edinburgh
    Country:
    United Kingdom
    We have a Baxi Potterton boiler model Suprima 40L.
    We had problems a few years ago and these were resolved
    when a new PCB was fitted, but now it's being temperamental again.

    Unfortunately the pilot light regularly goes out, but whether or not it
    can be reignited by pressing the manual reset button depends on the
    time of day.

    In the morning the boiler will always come on but at some point during
    its on cycle (or just when the cycle ends) the pilot light will go out
    and there will be a flashing red LED signal and will require manual
    reset to reignite.

    In the evening cycle, it may do the same thing - or it may not switch on
    at all initially and a warning amber LED signal will flash, meaning that
    the pilot light is trying to reignite without success. In this case
    sometimes it may eventually reignite.

    Does anyone have any ideas what might be wrong?

    Thanks for your help.
     
  2. powell30

    Joined:
    29 Jan 2008
    Messages:
    1,214
    Thanks Received:
    129
    Location:
    Birmingham
    Country:
    United Kingdom
    You need a good rgi who can diagnose faults. This is most likely an issue requiring entrance to the combustion bxx and as such needs a qualified rgi.

    Sorry can't help any further
     
    • Thanks Thanks x 1

Share This Page