I asked this in the CC but have not had any more replies, I'm sure there must be someone in here that will have come accross this problem.
Here goes---
The boiler does not light in Hot water or Central heating it just fires for about 4/5 secs and then goes off and repeats this, it is the single PCB board type , Thermisters have good resistance (on cold as it does'nt get hot at all) and the APS/venturi, Flow switch diaphragm is fine.
Any ideas?
Here goes---
The boiler does not light in Hot water or Central heating it just fires for about 4/5 secs and then goes off and repeats this, it is the single PCB board type , Thermisters have good resistance (on cold as it does'nt get hot at all) and the APS/venturi, Flow switch diaphragm is fine.
Any ideas?