Bosch Washing Machine not working anymore

[newguy159]

Hi
My dad opened up the washing machine and disassembled it to bits. He found out that the bearings need replacing, so he did that.
Now he closed the machine back together into one piece and it doesn't work.
It turn on, you can select the program, but when you press the start button, nothing happens. It won't pump water into the machine, it won't spin and it won't run the drain program. The door won't lock either when you press the start button.

Does anyone know what the problem could be? He's suspecting that the electronic stuff has been messed up, but we have no idea how they should have been.

Any help is appreciated.

Thanks

 

[rocks1]

Tricky one ,I can only suggest is that u check motor brushes or wire to motor. If the motor /plug / wire is off that causes this fault. Other than that you need to back track to what you done.

 

[Leccy758]

Is the door lock wiring connected properly, if not you wont be able to start any program.

The first part of any program is the door interlock operating.

 

[newguy159]

Ok, thanks guys. Problem (FINALLY) solved!
The problem was that we overlooked (-.-') a wire and didn't connect that. We also connected a wire were it wasn't supposed to go, the wire which we found later, hidden, was supposed to go there and now it works.

Thanks for the suggestions!