combustion chamber
- Thread starter burts
- Start date
Sponsored Links
Admin.
Alert them to your post.
Alert them to your post.
I have sorted it out now, very quick response from them. I did email ages ago but no reply. Not really had a need to be on the combustion chamber but....
I have a potterton suprima standard efficiency that keeps locking out. It runs fine when I am there, but they say they re set it 3 times a day. I have changed the o/h stat and temp sensor. Literally everything checks out fine and the flow return temps are good and the difference is about 10. Apart from suggesting a board then I am stuck. It looks like it has one of the new boards on it. Any ideas dan?
I have a potterton suprima standard efficiency that keeps locking out. It runs fine when I am there, but they say they re set it 3 times a day. I have changed the o/h stat and temp sensor. Literally everything checks out fine and the flow return temps are good and the difference is about 10. Apart from suggesting a board then I am stuck. It looks like it has one of the new boards on it. Any ideas dan?
Board
Sponsored Links
- Joined
- 10 Oct 2011
- Messages
- 16,396
- Reaction score
- 4,041
- Country
Already posted in the CC.
Pcb every time. I don't even bother looking at anything else now.
Rather foolish considering the chances of the GV taking out the PCB.
Aye, same here mate but mine was two years ago!! Mind you they all like a drink, so you'll not get much sense out of the Mods in there.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
