I got a corsa 1.4 16v and it failed on a spongy brake pedal so went to bleed the brakes and the bleed nipples snapped so i replaced the cylinders and pipes then tryed to bleed but nothing also the brake pedal now just hits the floor with ease and no brakes. any help or info would be very helpfull thanks
CORSA 1.4 16V
- Thread starter majestic
- Start date
Sponsored Links
Its best to use a brake bleeder vessel to do this as this sucks the fluid through, but it can be done with an assistant......open one bleed nipple at a time, keep the master cylinder full, and get someone to gently press the pedal until it hits the floor. Tell them to keep it there while you tighten up the nipple. Assistant then lets the pedal come to the top slowly, you open the nipple and repeat the process.
John
John
Sponsored Links
