Glow Worm digital timer - instructions needed

[chicken65]

Mum has recently moved into a new house fitted with a Glow Worm Ultracom 2 24cxi boiler. It has the optional digital timer fitted but it needs setting.

I've contacted Glow Worm to request the manual but they sent me the boiler manual. They didn't inspire confidence so frankly I couldn't be bothered to explain their mistake. I haven't managed to unearth the manual on their web site or Google despite a good hour of searching.

Does anyone have a link to the manual for the timer? Link to what I think is the part.

Thanks.

 

[chicken65]

All is forgiven. Glow Worm did supply the correct document when I replied and asked them to check again. In case anyone else needs this, you need the
"Installation and User Instructions" for "Digital Timer Kit Part No. 0020095197". I have the PDF but am not going to post it due to copyright. If you encounter one of these and you need to get the heat on, here's the basics. The rest is fairly intuitive - it was the initial setting of the current time that stumped me.

To reset:

1. Ensure that the right sliding switch is in the RUN position

2. Press the ‘R’ button with the point of a biro or similar implement then release

The display will start to ash 0:00

The time and day can now be set up.

To set the time and day

1. Press the HR and MIN keys simultaneously for 2-3 seconds. The display will stop ashing

2. Press the DAY button to select the required day. An arrow will be shown in the display indicating the day of the week

3. Use the HR and MIN keys to set the time

4. After 15 seconds the times will automatically pick up the time of day (the colon will start to ash) OR the right sliding switch can be set to the radiator or tap symbol and then back

to RUN. The time of day will activated immediately.

 

[LizS83]

Hi,

I am failing to make the program function work. Any tips on how to do this? I've contacted glow worm but no reply. Any chance you could email me the instructions?

Thanks

 

[gillysb]

Need instructions for digital timer kit 0020095197 to get programme working. Have tried Glow worm but they have sent wrong instructions & when I contacted them again was told they didn't have any. Have spent several hours on Internet but no luck. Can anyone help?