Heat resistant glue for oven glass

Discussion in 'Appliances' started by noodlz, 15 Jun 2006.

  1. noodlz

    Joined:
    13 Sep 2004
    Messages:
    867
    Thanks Received:
    0
    Country:
    United Kingdom
    Inside glass to built-in oven has come loose and needs to be glued back together...problem is everything I've tried eventually gives and the glass drops again!

    Can't use oven without it and all it needs is to be glued back into place...and stay there! Otherwise will have to replace door or whole oven which will be a pain.

    Anyone got any ideas what I could use?

    Help'd be greatly appreciated :D
     
  2. noodlz

    Joined:
    13 Sep 2004
    Messages:
    867
    Thanks Received:
    0
    Country:
    United Kingdom
  3. Sleepyhead

    Joined:
    2 Apr 2006
    Messages:
    1,896
    Thanks Received:
    27
    Country:
    United Kingdom
    When I worked for Indesit, had to glue quite a lot of door glass in.
    Clean the old stuff off and make sure the glue area is clean and dry.
    Run a fairly thick bead of high temperature silicone around the frame. Put the glass in place then put a weight on top of the glass. Leave it for 24 hours, it'll set fine then and will last for ages.
    Without the weight and letting it dry it won't last long.
     
  4. bob white

    Joined:
    22 Apr 2006
    Messages:
    5
    Thanks Received:
    0
    Country:
    United Kingdom
    hi email me i send you info on some
     

Share This Page