Hoover Dishwasher HND6515 heating problems

[yassie]

Hi
I have a Hoover Dishwasher HND6515
It is washing cold. would this be the thermostat or element?
It also does not always get to the end of it's cycle and will cut out giving a fault malfunction.
PLEASE HELP!

Thanks
Rachael

 

[zipper]

Which error code is displayed?
Normally error codes on this machine are manifested by the first 2 program LED's (on the left) flashing in a particular sequence. Count the flashes between pauses & post results here.

 

[yassie]

Hi it is flashing very quickly with no pauses.
I've just tried it again, it does it's first bit then the water empties then it stops!
Thanks

 

[zipper]

Is your machine a freestanding model or integrated type?

 

[yassie]

free standing.

 

[zipper]

Try this:
Check that the on/off switch is in the off position. Open the door and close the flap of the detergent's dispenser. Close the door. Push and hold the 1st program button (counting from left). Power-on the dishwasher with the on/off button. Release the 1st program's button and push it again twice within 10 seconds. You should get a short audible signal & the first 2 led's become lit. After a few seconds they should first go dark & then exhibit a flashing error code after about 5 seconds.