My hotpoint WD62 washing machine had leak in the door seal and it blew the interlock switch and it also blew a track on the PCB.
I replaced the switch and the track with a thin wire but when I went to replace the connectors on the PCB......
I could not remember how the 3 "blade" connectors are connected.
There are 3 wires Grey, Black and Blue.
Can anyone help please?? or Suggest where I can get this info?
Thanks
I replaced the switch and the track with a thin wire but when I went to replace the connectors on the PCB......
I could not remember how the 3 "blade" connectors are connected.
There are 3 wires Grey, Black and Blue.
Can anyone help please?? or Suggest where I can get this info?
Thanks