hotpoint WMA64 carbon brush replacing..

[goofy gorilla]

ok...im trying to get to the motor to replace the carbon brushes on the motor..trouble is how do i get the motor out...i can remove the lower back panel and see half of the motor in the bottom left corner...i can take the top lid off the machine as its got two hidden scews one on each side...cant see how to remove the rest of the case..any ideas guys..

 

[rocks1]

Undo the two 13 mm bolts next to it and it pulls off. Then pull off motor plug. Tip mc forward so it comes out of bottom of mc or in the space where the lower white panel is.