my beko dwd5411 dishwasher won't drain

Discussion in 'Appliances' started by Hena, 13 Apr 2012.

  1. Hena

    Joined:
    13 Apr 2012
    Messages:
    1
    Thanks Received:
    0
    Location:
    Sheffield
    Country:
    United Kingdom
    Hi
    My Beko DWD 5411 dishwasher has been an absloute dream until yesterday. It stopped at the wash cycle and didn't drain. I checked and cleaned the filters and spray arms and manually drained it by disconnecting the outlet pipe and this worked fine. It would not start. this morning it started wonderfully but has stopped at the same point. What can I do? :?:
     
  2. zipper

    Joined:
    20 Nov 2009
    Messages:
    2,789
    Thanks Received:
    505
    Location:
    Aberdeen
    Country:
    United Kingdom
  3. knobby41

    Joined:
    18 Apr 2012
    Messages:
    44
    Thanks Received:
    2
    Location:
    Gwent
    Country:
    United Kingdom
    not to attempt to insult you, but do you scrape the food of the dishes before you put them into the dw??

    I have been to customers that assume that a dw will remove half a burger and chips too!

    it might also be the waste pipe connected to the sink/plumbing (trap) its not a nice job, but check to see if any of this is blocked.

    Another option to look for is a waste extension. dws are designed to pump out a certain volume of water. by using a waste extension, the dishwasher would not be able to expel this waste water........
    hope some of this info helps, even tho it may not be the cure
     

Share This Page