Pyronix SMS Alerts to Personal Number

[Alexkak]

Hi,

I am about to install a Pyronix enforcer system, before I unbox everything and go any further, can I setup the system to send SMS alerts to my personal mobile number using the PSTN dialler, or does this need to be something that is activated by affiliated installer? I only want to be able to check the status of the system and activate/deactivate it whilst I'm away, and to send messages if the alarm is triggered.

Regards,

Alex.

 

[sparkymarka]

Don't think you can can have any control over the panel on PSTN via text ...

 

[Alexkak]

So will not be able to use this function?? it saying this in the online manual


5.15.4 User SMS Signalling


To signal via SMS, a valid mobile number and the desired event types must be programmed.

SMS Details: Up to 10 mobile numbers can be programmed.


User Mobile: The mobile phone where all events will be sent.

 

[sparkymarka]

It will text out ....but you can't text in to disarm the sytem on pstn

 

[turanafon]

ah i just found this thread,
Can this sms alerts now be done on the new V10 Euro46 panels