We have a problem where everything in the top tray was still dirty at the end of the cycle. I noticed that a seal had gone on this big nut on the back wall of the dishwasher, I think this supplies the water into the arm of the top rotor blade. I have ordered a new seal. The thing that is puzzling me though, is that the top tray can be fed into the dishwasher on 2 levels - however if its on the lower of the 2 levels then this would mean the arm that feeds the top rotor blade would not line up with this input seal/water supply - or am I missing something?
Thanks in advance for any advice on this.
Thanks in advance for any advice on this.