Replacement Drawer Handle

[gordon.hunter]

Hi all,

during a house move the handle on a chest of drawers got damaged.

I wish to replace it.

It has been suggested to just replace all the handles. A valid suggestion but obviously more expensive.

Surely there is a handle out there to fit and is the same or very similar.

I used Verniers to measure the centres of the holes for attachment.

The distance between the handle centres is 119mm.

See attached for images.

Regards, Gordon

 

[foxhole]

Anything here? http://www.thehandlestudio.co.uk/5-cabinet-bow-handles

 

[London Mike 49]

How about this http://www.caravan-components.co.uk/Black-2606-Cupboard-D-Caravan-Handle

Mike

 

[gordon.hunter]

Anything here? http://www.thehanh a dlestudio.co.uk/5-cabinet-bow-handles

Thanks for the link.

http://www.thehandlestudio.co.uk/pe...ltern-hand-made-iron-cabinet-bow-handles.html

This one looks perfect although the centres for the holes are not right. I need 119mm between centres.

Such a shame.

The hunt continues.

 

[gordon.hunter]

http://www.caravan-components.co.uk/Black-2606-Cupboard-D-Caravan-Handle

Thanks for the suggestions. Its not the same finish and therefore would look out of place.

Also there is not information regarding distance between centres and therefore I dont know whether it would fit.

 

[big-all]

is there other units in the set that you can swap handles from a remote single door or drawer where the difference wont be noticed