Satellite Help

[sajeel]

I have installed 7 satellite points and a quad lnb with 2 two feed all wires are taken to central location, i need an amplifier that will take input lnb1 and lnb2 directly and feed to 7 location without having to feed to 1 point and using rf return from satellite box.

 

[ericmark]

Right below your post here this has all been talked about why make another post?

 

[ChrisFrost]

I have installed 7 satellite points and a quad lnb with 2 two feed all wires are taken to central location, i need an amplifier that will take input lnb1 and lnb2 directly and feed to 7 location without having to feed to 1 point and using rf return from satellite box.

So, you want 7 independent satellite receivers, and you've installed a quad LNB and just two wires... Sorry to say it but if you've explained your needs correctly then you've installed the wrong gear. There isn't a distribution amp that will do what you want because satellite signals don't work the same way as TV signals.

This page explains the detail LINK

 

[sajeel]

I found out you need to use a mutliswitch not a distribution swtich such as labgear MS581E
see lkink
http://www.labgear.co.uk/products.p...e=Multiswitches &sc2name=&pid=58&pname=MS581E

triax also make mutliswitch.