Is the connector for joining soak away to feeding pipework [110mm] built into one of the units or is it purchased separately, none of my local suppliers have been able to supply, Travis, Plumb-base, etc.
Soak away
- Thread starter foxhole
- Start date
Sponsored Links
R
RedHerring2
If you're talking about the crate type of soakaway, such as the Polystorm or similar, mine had a 150mm hole, with knockouts, in several sides of each crate, so a reducer and a small piece of 150mm pipe was easy to fit into an appropriate hole.
As Studips, says just cut the fabric around the pipe.
Incidentally, mine came with some 50mm or 100mm, (I can't remember the height correctly now.) spacers to retain the height of the shingle bed underneath, and around the sides if required.
As Studips, says just cut the fabric around the pipe.
Incidentally, mine came with some 50mm or 100mm, (I can't remember the height correctly now.) spacers to retain the height of the shingle bed underneath, and around the sides if required.
Sponsored Links
Thanks, it is a crate type.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
