Which circular saw blade

[ianhutchinson]

Hi

I have a Makita circular saw with a 24t blade. I am wanting to fit new internal doors to the house that will require some cutting. Is this the correct saw blade for a neat cut???, please reccommend.

Thanks in advance

Ian

 

[tall paul]

nope... i would never use a cicular saw on a door..... get yer plane out and do it with that

 

[ianhutchinson]

I dont want to trim the edges using a saw, but the bottom of the door

 

[big-all]

score the door with a stanley knife underneath and on the front edge [end of cut] on the cut line

strait edge or guide fence set the blade 2mm 1tooth deeper than the depth of cut
an assuming the blade isnt blunt you will be ok

 

[ianhutchinson]

Thanks

But what is the best type of blade to ensure a clean cut on doors etc

 

[big-all]

24 will be fine as you need to arrtis all cut edges at 45 degrees this will remove any little imperfections and drasticly reduce any larger ones

 

[ianhutchinson]

What do you mean by arrtis??????

 

[anobium]

What do you mean by arrtis??????

He means ariss, that is the sharp edge of any piece of wood.