WOOD BLOCK FLOORING ADHESIVE ?

Discussion in 'Floors, Stairs and Lofts' started by STEVEROG, 18 Jul 2005.

  1. STEVEROG

    Joined:
    13 Jul 2005
    Messages:
    181
    Thanks Received:
    0
    Location:
    Hampshire
    Country:
    United Kingdom
    What's the best adhesive for sticking down wood blocks and where do I get it from ?

    The blocks are teak 9inch x 3 inch x 1.25 inch thick. Each block has a small dove tail on the bottom. Blocks have been reclaimed and did have a thick layer of bitumen on the bottom of them. Bitumen has been removed apart from a very thin layer (probably less than 0.5mm thick).

    The floor they are going down onto is plywood.
     
  2. WoodYouLike

    Joined:
    14 Nov 2004
    Messages:
    7,712
    Thanks Received:
    213
    Location:
    Kent
    Country:
    United Kingdom
    Normal parquet adhesive will do the trick.There are several brand available, we normally us lecol5500 (see my profile for details)
     
  3. stevejh

    Joined:
    29 Jul 2005
    Messages:
    3
    Thanks Received:
    0
    Location:
    Devon
    Country:
    United Kingdom
    out of interest how did you get the bitumen off?
     

Share This Page