Hotpoint WF540 lights 3&4 f03 Ntc fault

[pfr108]

Hi all, Can you please tell me what i have to replace to fix this fault
Below is a link to my youtube vid if it helps.
http://www.youtube.com/watch?v=f_f2c9IP8g4

Thanks Kev

 

[rocks1]

One of two things. Ntc on heater or pcb. Ntc. is about a tenner.

 

[pfr108]

One of two things. Ntc on heater or pcb. Ntc. is about a tenner.

Thanks for the swift reply I'll try a new heater first then or can i puchase the Ntc separate?

 

[rocks1]

Ntc is separate. Check the connections first it's got 2 thin blue wires on it. Remove rear lower panel and you will see it.

 

[pfr108]

Yes it does have 2 thin blue wires, Will the Ntc come out whilst the heater element is in situ or do i have to remove the element first?

 

[rocks1]

Undo the nut next to it and the Ntc slides out. And leaves the heater in situ.

 

[pfr108]

Got it out successfully thanks, does a WMA 32 have the same Ntc?
I acquired one today with noisy bearing what we are using just to get us by.

 

[rocks1]

Only if you can tag the ends on it , the connections are different that's all.

 

[pfr108]

Cheers...I'll give it a try when the WMA 32 has finished it's wash cycle and i have took a couple of headache tablets...lol
Will report back as soon as...Thank you

 

[pfr108]

Tried the Ntc from the wma and still the same problem...Looks like it is the module at fault.

 

[rocks1]

Emw in Nottingham do recon pcbs at 40 quid.