Having just re-connected the outlet tube from my dishwasher to the spur / "fir tree connector" at the kitchen basin waste (just above the "S" bend - I have a small leak. It drips abut half a cupful every 30 minutes if the dishwasher is working.
Hopefully the picture is visible below.
The problem is that the pipe is not a tight fit over the connector. So even if I tighten the jubilee pipe clip at tight as possible, water can still drip.
I thought I could replace the pipe with something a bit narrower at the end but I wondered if there was an easier solution ?
Thank you
http://s630.photobucket.com/user/he...s[user]=90807354&filters[recent]=1&sort=1&o=0
http://s630.photobucket.com/user/he...s[user]=90807354&filters[recent]=1&sort=1&o=0
Hopefully the picture is visible below.
The problem is that the pipe is not a tight fit over the connector. So even if I tighten the jubilee pipe clip at tight as possible, water can still drip.
I thought I could replace the pipe with something a bit narrower at the end but I wondered if there was an easier solution ?
Thank you
http://s630.photobucket.com/user/he...s[user]=90807354&filters[recent]=1&sort=1&o=0
http://s630.photobucket.com/user/he...s[user]=90807354&filters[recent]=1&sort=1&o=0