Hello all im installing a new bath etc in my bathroom and the mixer valve does both the bath and the shower. The connections onto the mixer are 22mm. Cold water is from the mains (good pressure) and the hot water is from combi. All current pipe in the bathroom including the current bath feeds are 15mm. Can I run 15mm hot and cold to the mixer then step up to 22mm for the mixer connection? I know the bath will fill slower on 15mm than 22mm but are there any reasons why this will not work?
Shower and bath mixer
- Thread starter Hplumb
- Start date
Sponsored Links
It will be fine, just reduce at the taps
The hot actually comes in on 22mm and reduces to 15mm at the start of the bathroom so I can do the hot on 22mm and the cold is 15mm only. Im thinking hot all the way in 22mm and cold mains good pressure in 15mm then step upto 22mm?
Many thanks Terry
Sponsored Links
Just to clarify what Terry said - he means step up to 3/4" at the mixer so use a 15mm x 3/4"tap connector on both.
Many thanks chaps really appreciate your help. Thank you
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
