Need O rings for the pump in a baxi 105e instant

Joined
2 May 2006
Messages
23
Reaction score
0
Location
Lancashire
Country
United Kingdom
I found that my boiler is leaking from where the pump is screwed in. The leak is from the housing around the top screw (there are two screws holding the pump in - one at the top right and one at the bottom).

I think it is the o ring that has failed and I'd like to know where I can get a replacement from. I've done a search online but I can't find any.

Thanks for reading.
 
Sponsored Links
Have you tried yet to nip up the nut just in case its needs tighening.
 
What nut would that be bob.
try cleaning up th O rings and smearing them with silicone grease
 
What nut would that be bob.
try cleaning up th O rings and smearing them with silicone grease

Thanks for the suggestion. As I'd have to drain the system, I'd prefer to have new O rings ready but I don't know what size I need.
 
Sponsored Links
Just buy them as a spare part, then you get the correct material. If you guess you'll get it wrong.

They'll quite possibly still leak though!
 
Just buy them as a spare part, then you get the correct material. If you guess you'll get it wrong.

They'll quite possibly still leak though!

Is there something else I need to do to make sure it does not still leak?
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top