TGV Cladding advice

lancred · Posted: Thu Oct 29, 2009 11:37 pm Post Subject: TGV Cladding advice

Ive just had a timber lodge built. The build has a partition which has been cladded. Can someone tell me what profile it is?

Ive searched on the net & im unable to find the same stuff. The face measure 112mm.

see pic. cheers

big-all · Posted: Fri Oct 30, 2009 12:12 am Post Subject:

looks like 5"x3/4" txg cladding to me

its the size before you machine the wood

__________________
big all
we are------------------ all still learning

lancred · Posted: Fri Oct 30, 2009 7:10 am Post Subject:

cheers for the double reply big-all. could i get this from a timber merchants?

big-all · Posted: Fri Oct 30, 2009 6:37 pm Post Subject:

yes just ask for ex 5"x3/4" "V" groove cladding

he may say it 7/8ths or 5/8ths just say "does that finnish up as 16mm x 112mm coverage or whatever the actual size is

ooo and say i want to get say 20x 1.432m lengths from it they will work it out and probably cut them to length if your accurate

__________________
big all
we are------------------ all still learning

lancred · Posted: Fri Oct 30, 2009 8:00 pm Post Subject:

big-all wrote:

yes just ask for ex 5"x3/4" "V" groove cladding

he may say it 7/8ths or 5/8ths just say "does that finnish up as 16mm x 112mm coverage or whatever the actual size is

ooo and say i want to get say 20x 1.432m lengths from it they will work it out and probably cut them to length if your accurate

cheers for advice. i'll b calling them in the morning. im hoping that they can do runs of 2.8m as thats whats currently on the partition at the moment. easier for a noob aswell

have some rep for your help aswell

big-all · Posted: Fri Oct 30, 2009 9:29 pm Post Subject:

dont forget they probably shut at 12.30 dinner time thats if they open at all on saturday

__________________
big all
we are------------------ all still learning