Galaxy8

Joined
26 Jul 2009
Messages
199
Reaction score
24
Location
Yorkshire
Country
United Kingdom
Would it be possible to swap a Mk3 keypad to an Mk7 keypad on the above panel?
 
Sponsored Links
Depends on software version

Should / may work on version 2.xx upwards, though never fitted a new keypad on such an old system.

Suck it and see, if you get flashing ************ then no.
 
Depends on software version

Should / may work on version 2.xx upwards, though never fitted a new keypad on such an old system.

Suck it and see, if you get flashing ************ then no.

It says version V1.04, i guess not then. The guy on ebay said any galaxy panel though?
 
Depends on software version

Should / may work on version 2.xx upwards, though never fitted a new keypad on such an old system.

Suck it and see, if you get flashing ************ then no.

It says version V1.04, i guess not then. The guy on ebay said any galaxy panel though?

jeez v1.04 thats really old

Like i say josh, try it, something tells me it wont, but you can only try.

If not, sell it back on ebay.
 
Sponsored Links
Depends on software version

Should / may work on version 2.xx upwards, though never fitted a new keypad on such an old system.

Suck it and see, if you get flashing ************ then no.

It says version V1.04, i guess not then. The guy on ebay said any galaxy panel though?

jeez v1.04 thats really old

Like i say josh, try it, something tells me it wont, but you can only try.

If not, sell it back on ebay.

I know, came with house but smashed keypad off the wall when moving wardrobes!

I'll try it and see and report back!
 
Depends on software version

Should / may work on version 2.xx upwards, though never fitted a new keypad on such an old system.

Suck it and see, if you get flashing ************ then no.

It says version V1.04, i guess not then. The guy on ebay said any galaxy panel though?

jeez v1.04 thats really old

Like i say josh, try it, something tells me it wont, but you can only try.

If not, sell it back on ebay.

Recieved the Item the other day, and it WORKED. It looks a lot better than the Mk3 keypad. Although,l have to say, when entering my code and pressing A/B for the required set, instead of beeping twice when set, it gives one beep, but slightly longer. I am unsure about this, however its sets and unsets ok?
 
Nice one :D

Confirmation tone should beep twice though :?:
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top