HOTPOINT WML520

Joined
9 Jul 2009
Messages
14
Reaction score
1
Location
Yorkshire
Country
United Kingdom
The door locked light has started flashing on Hotpoint WML520.
The machine will not do anything!

If I turn it off at the wall and leave it 10 seconds then turn it back on the door lock makes a loud screech noise and the door locked light stays lit?

It will then start any programme you select for about 2 seconds before stopping and not doing anything.

After that the door will not open!!!!!!!!!

Is it time for a new machine?
 
Sponsored Links
When it makes a loud screech noise is it on spin or nothing at all just standby. Check the connections on the pcb door lock wires are loose. Hence it's not locking , a motor fault can also cause this.
 
Sponsored Links
Replace the door lock. It's controlled by a solinoid.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top