Menvier ts800, adding 2 contacts and a pir.

B

barcelona

Joined

28 May 2003

Messages

93

Reaction score

0

Country

• 7 Feb 2011

• #1

Hi,
I have a Menvier Ts800r with seven out of eight zones used and one free.
Can I add two door contacts to the spare zone, and add a pir to an existing pir circuit without needing the Engineer code ? None of the zones are ever omitted btw.

Thanks.

 

A

Alarm

• 7 Feb 2011

• #2

Cannot see why not, but you wont know which one has tripped when doubled up on a zone, thats the only drawback.

 

B

barcelona

Joined

28 May 2003

Messages

93

Reaction score

0

Country

• 7 Feb 2011

• #3

Alarm said:

Cannot see why not, but you wont know which one has tripped when doubled up on a zone, thats the only drawback.

Click to expand...

Cheers for the reply. Does that mean I don't need the engineer code to add the sensor's ?

 

A

Alarm

• 7 Feb 2011

• #4

No it defaults to user reset on tamper IIRC.
Old panel.

Unless you mean a M800.

 

B

barcelona

Joined

28 May 2003

Messages

93

Reaction score

0

Country

• 7 Feb 2011

• #5

Alarm said:

No it defaults to user reset on tamper IIRC.
Old panel.

Unless you mean a M800.

Click to expand...

Cheers. No it's a ts800r. So I should be ok ?

 

A

Alarm

• 7 Feb 2011

• #6

Should be, just checked cannot see why not.

 

B

barcelona

Joined

28 May 2003

Messages

93

Reaction score

0

Country

• 7 Feb 2011

• #7

Alarm";p="1892703 said:

Should be, just checked cannot see why not.[/quote

Many thanks.

Click to expand...

 

B

barcelona

Joined

28 May 2003

Messages

93

Reaction score

0

Country

• 8 Feb 2011

• #8

After closer inspection I found all eight zones are used and expansion board's are no longer available. Been down to the local security shop and got an R8. Only £140 for everything I need. Sorted. Thanks for the advice, much appreciated.